VCE NS0-093 Dumps, NS0-093 Valid Test Prep

Rated:

, 0 Comments

Total visits: 8

Posted on: 05/27/25

With only one Network Appliance NS0-093 exam you can do this job nicely and easily. To do this just enroll in the Network Appliance NS0-093 certification exam and download the updated and real Network Appliance NS0-093 Exam now and start this journey today. We are quite confident that with NS0-093 exam dumps you can pass the upcoming NetApp Accredited Hardware Support Engineer exam in the first attempt.

The NS0-093 exam is designed to test the candidate on various hardware support topics such as installation, configuration, maintenance, and troubleshooting of NetApp hardware components. NS0-093 exam also covers topics such as disk shelves, controllers, storage systems, and software upgrades. Candidates who pass the NS0-093 exam are considered NetApp Accredited Hardware Support Engineers, which demonstrates their ability to manage and support NetApp hardware components effectively. NetApp Accredited Hardware Support Engineer certification also validates their knowledge of best practices and industry standards for NetApp hardware support.

Network Appliance NS0-093 Certification Exam is an essential credential for IT professionals who work with NetApp hardware products. By demonstrating their expertise in providing hardware support services, candidates can enhance their career prospects and contribute to the success of their organizations.

>> VCE NS0-093 Dumps <<

NS0-093 Valid Test Prep & Practice NS0-093 Test

New questions will be added into the study materials, unnecessary questions will be deleted from the NS0-093 exam simulation. Our new compilation will make sure that you can have the greatest chance to pass the exam. If you compare our NS0-093 training engine with the real exam, you will find that our study materials are highly similar to the real exam questions. So you just need to memorize our questions and answers of the NS0-093 Exam simulation, you are bound to pass the exam.

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q51-Q56):

NEW QUESTION # 51
In preparation for an upgrade to ONTAP 9.6P8 software, you have uploaded the ONTAP image
96P8_q_nodar_image.tgz onto your local web server with address 192.168.10.10.
Which is correct command syntax to download this image to the cluster image repository?

A. ClusterA::> storage firmware download -node local -package-url
http://192.168.10.10/96P8_q_nodar_image.tgz
B. ClusterA::> cluster image package get -url
http://192.168.10.10/96P8_q_nodar_image.tgz
C. ClusterA::> cluster image package get -url
http://netapp.com/ontap9/downloads/96P8_q_nodar_image.tgz
D. SP ClusterA-01> cluster image package get -url
http://192.168.10.10/96P8_q_nodar_image.tgz

Answer: B

Explanation:
Command Syntax for Downloading ONTAP Image:
* The cluster image package get command is used to download the ONTAP image from a specified URL to the cluster's image repository.
* The syntax requires the -url parameter followed by the full URL of the image file.
Why Option C Is Correct:
* This command syntax directly downloads the image from the local web server at http://192.168.10.10/ to the ONTAP cluster repository.
* Other options either refer to incorrect commands or unsupported URLs.
NetApp Reference Documentation:
* The "ONTAP Software Upgrade Guide" provides the exact command and steps for downloading ONTAP images via HTTP or FTP.

NEW QUESTION # 52
When you plan an ONTAP upgrade, which NetApp tool generates a detailed upgrade plan?

A. Active IQ Unified Manager
B. Upgrade Advisor
C. Active IQ Config Avisor
D. ONTAP System Manager

Answer: B

Explanation:
The Upgrade Advisor is a NetApp tool that generates a detailed, step-by-step plan for upgrading an ONTAP system. This tool is available through the Active IQ portal and helps ensure a smooth and risk-free upgrade process.
* Provides a tailored upgrade plan based on the current ONTAP version, cluster configuration, and desired target version.
* Identifies potential risks, compatibility issues, and pre-requisite tasks for the upgrade.
* Offers detailed instructions for each stage of the upgrade process.
Key Features of Upgrade Advisor:
* A. ONTAP System Manager:
* While System Manager can be used to initiate upgrades, it does not generate a detailed upgrade plan.
* B. Active IQ Unified Manager:
* Unified Manager focuses on monitoring and management but does not provide upgrade plans.
* D. Active IQ Config Advisor:
* Config Advisor checks for best practices and configuration issues but is not used for generating upgrade plans.
Why Other Options Are Incorrect:
* NetApp's "ONTAP Upgrade Guide" emphasizes the use of Upgrade Advisor for planning upgrades.
* Active IQ documentation provides detailed instructions on accessing and using the Upgrade Advisor tool.
References:

NEW QUESTION # 53
What is the recommended value for disk and CPU use when you plan an upgrade?

A. less than 50%
B. less than 85%
C. less than 90%
D. less than 70%

Answer: D

Explanation:
Upgrade Considerations for Disk and CPU Utilization:
* During an ONTAP upgrade, it is critical to ensure the system has sufficient resources to handle the upgrade process without impacting normal operations.
Recommended Threshold:
* NetApp recommends that both disk and CPU utilization should be below 70% before initiating an upgrade. This ensures that there is enough headroom for the upgrade operations and avoids performance degradation.
Steps to Verify Utilization:
* Use the system node show -fields cpu command to check CPU usage.
* Use the storage aggregate show -fields used command to check aggregate disk utilization.
NetApp Reference Documentation:
* "ONTAP Upgrade and Maintenance Guide" specifies the 70% threshold for disk and CPU usage during upgrade planning.
* The "ONTAP Performance Management Guide" provides methods for monitoring system resource utilization.

NEW QUESTION # 54
A node has failed.
Which two conditions must be met for an automatic takeover to be triggered? (Choose two.)

A. The cluster network must be available.
B. Mailbox disks must be reachable.
C. The combined utilization of both nodes must be less than 100%.
D. NVRAM must be synchronized.

Answer: B,D

Explanation:
For an automatic takeover to occur in an HA pair, the following conditions must be met:
* The HA pair uses mailbox disks to coordinate and ensure that both nodes have consistent cluster state information.
* If the mailbox disks are not reachable, the takeover process cannot proceed.
1. Mailbox Disks Must Be Reachable:
* The nodes in an HA pair continuously mirror NVRAM data to ensure that writes are protected.
* If NVRAM is not synchronized, the takeover cannot safely handle active workloads.
2. NVRAM Must Be Synchronized:
* A. The combined utilization of both nodes must be less than 100%:
* This is not a requirement for automatic takeover. ONTAP can handle higher utilization during failover scenarios.
* B. The cluster network must be available:
* While the cluster network is critical for normal operation, takeover can still occur if the cluster network is unavailable, as long as the HA interconnect is operational.
Why Other Options Are Incorrect:
* NetApp "ONTAP High Availability Guide" outlines the requirements for automatic takeover in HA pairs.
* "ONTAP NVRAM Synchronization and Failover Guide" explains NVRAM mirroring requirements.
References:

NEW QUESTION # 55
What are two options to remove Failure Byte on disks that are marked as failed? (Choose two.)

A. Reseat the disk.
B. Unfail the disk
C. Update the disk firmware.
D. Power cycle the disk shelf.

Answer: A,B

Explanation:
If a disk is marked as failed, the Failure Byte on the disk indicates that the disk has been flagged for failure.
This can be cleared using the following methods:
* What it does:Physically remove the disk from the shelf and reseat it. This action can trigger the system to re-evaluate the disk's status and clear the Failure Byte if the failure was transient or due to connection issues.
1. Reseat the Disk
* What it does:Using the disk unfail command in maintenance mode clears the Failure Byte and returns the disk to service.
* Command Example:
2. Unfail the Diskdisk unfail <disk_name>
* A. Power cycle the disk shelf:
* Power cycling the shelf may clear other transient hardware issues but does not specifically clear the Failure Byte.
* C. Update the disk firmware:
* While updating firmware can prevent future issues, it does not address disks already marked as failed.
Why Other Options Are Incorrect:
* NetApp "Disk Maintenance Guide" explains procedures to address failed disks.
* The "ONTAP Command Reference" covers the disk unfail command for clearing the Failure Byte.
References:

NEW QUESTION # 56
......

As a famous brand in this field, we have engaged for over ten years to offer you actual NS0-093 exam questions as your exams preparation. Our company highly recommends you to try the free demo of ourNS0-093 study material and test its quality feature before purchase. You can find the three demos easily on our website. And you may find out that they are accordingly coresponding to our three versions of the NS0-093 learning braindumps. Once you click on them, then you can experience them at once.

NS0-093 Valid Test Prep: https://www.prepawayete.com/NetworkAppliance/NS0-093-practice-exam-dumps.html

Tags: VCE NS0-093 Dumps, NS0-093 Valid Test Prep, Practice NS0-093 Test, NS0-093 Exam Duration, Exam NS0-093 Discount

Comments

There are still no comments posted ...

Rate and post your comment

Username:
Password:
Forgotten password?

Most Popular

VCE NS0-093 Dumps, NS0-093 Valid Test Prep

NS0-093 Valid Test Prep & Practice NS0-093 Test

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q51-Q56):

Login